HT-568 Crimping tool for RJ45 CAT5/CAT6/CAT6A Modular plug, with cutter

HT-568 Crimping tool for RJ45 CAT5/CAT6/CAT6A Modular plug, with cutter

The tool for manufacturing your own network and telephone cable to the required length in 4 steps. Cut cable with the cutter at the right length, remove plastic shell with wire stripper cleaner, insert cable wires into the desired connector, insert plug with cable into the bracket of the crimping tool and squeeze once vigorously. The blade guard ensures safe working and the plastic handles provide a good grip.

Instructions:

1. Remove the closed lock to open the handles.

2.Single-bladed side for cutting: Cut the cable to the desired length.

3. Two-bladed side for stripping: lnsert the cable between two blades, and squeeze the handles to remove the outer insulation of the

cable.

4. Crimping modular: Put the modular plug in correct place, gold contacts of the plug under and then inset the cable into the plug.

Squeeze the handles firmly to crimp the contacts and secure the cable.

Crimping tool for CAT5, CAT6 and CAT6A plugs

Suitable for 8P8C RJ45 modular connectors

For shielded and unshielded plugs

Easy cable stripping for flat cables

Smooth-running cable cutter

Easy to use

Rubbered, non-slip plastic handles

Tool made of high-grade metal

General product data:

Weight: 0.252 kg

Height: 2 cm

Width: 7.5 cm

Length: 19 cm