Digital LED Network Cable Tester For RJ45/BNC UTP/STP/FTP/Coaxial Wire

Digital LED Network Cable Tester For RJ45/BNC UTP/STP/FTP/Coaxial Wire

Description:

Split structure: With free opening and closing, it is easy to operate as a whole. The two ends of the split can be aligned remotely.

Can be carried with you, compact and lightweight.

Strong battery life and large capacity.

Universal network/telephone line: RJ45+RJ11 dual interface, supporting various specifications such as 8P/6P/4P for network and telephone line testing.

Operation Instruction Of Cable Tester:

Test unshielded network cables, with lights on: 1, 2, 3, 4, 5, 6, 7, 8;

Test the shielded network cable, with lights on: 1, 2, 3, 4, 5, 6, 7, 8, G;

Test the phone line and turn on the lights: 1, 2, 3, 4, 5, and 6;

Eight core network cable detection: Turn on the switch, plug in the wire, and the 1-8 indicator lights will light up sequentially to indicate the correct circuit.

Shielded network cable detection: Turn on the switch, plug in the wire, and after the 1-8 indicator lights turn on in sequence, the G light turns on to indicate the correct line.

Technical Features

Test function for cables with Rj45, RJ12, and RJ11 plug.

Auto-scan and step by step testing.

Main device with one Rj45 female connector, and one R」1 1/12 female connector.

Remote unit with one Rj45 female connector, and one R」11/12 female connector.

Test modes including Loop-back/Continuity/Open/Shorts/Miss-wire/Pin to pin configuration.

Various LED for status display.

Power by 9 Volt block battery

Included a black zipper bag

For quick testing of network and telephone cable

Suitable for RJ45-, RJ11- and RJ12 cable

Master and remote unit with LED display

Tests continuity, assignment, ground and short

Tests 8P8C, 8P4C, 6P6C, 6P4C, 6P2C, 4P4C, 4P2C

Automatic or manual scan

Remote testing of installed cables

9 V battery required (not included!)

Handy device with small bag

General product data:

Weight: 0.107 kg

Height: 3 cm

Width: 10 cm

Length: 10.5 cm