Click to open expanded view
Multifunction Network Cable Tester - RJ45/UTP/FTP/BNC
Technical Features
Test function for cables with RJ45, RJ12, RJ11 and BNC plugAuto-scan and step by step testing.
Main device with one Rj45 female connector, and one R」1 1/12 female connector.
Remote unit with one R」45 female connector, and one R」11/12 female connector.
Test modes including Loop-back/Continuity/Open/Shorts/Miss-wire/Pin to pin configuration.
Various LED for status display.
Power by 9 Volt block battery.
Included a black zipper bag.
Multifunction Network Cable Tester - RJ45/UTP/FTP/BNC
Practical cable tester for telephone and network lines. The device tests all wire pairs and detects faults such as open, short-circuited, crossed or twisted wire pairs as well as split pair faults within seconds. With the associated remote unit, a cable or line can also be tested after installation. The operation is simple, the clear display is done via LEDs. A battery is not included.
Technical Features
Test function for cables with RJ45, RJ12, RJ11 and BNC plugAuto-scan and step by step testing.
Main device with one Rj45 female connector, and one R」1 1/12 female connector.
Remote unit with one R」45 female connector, and one R」11/12 female connector.
Test modes including Loop-back/Continuity/Open/Shorts/Miss-wire/Pin to pin configuration.
Various LED for status display.
Power by 9 Volt block battery.
Included a black zipper bag.
For quick testing of network and telephone cable
Suitable for RJ45-, RJ11-, RJ12- and BNC- cable
Master and remote unit with LED display
Tests continuity, assignment, ground and short
Tests 8P8C, 8P4C, 6P6C, 6P4C, 6P2C, 4P4C, 4P2C
Automatic or manual scan
Remote testing of installed cables
9 V battery required (not included!)
Handy device with small bag
General product data:
Weight: 0.113 kg
Height: 2.7 cm
Width: 9.5 cm
Length: 11.3 cm
