Tester for RJ11,RJ45 and BNC Cables, with Remote Unit & PoE Finder

Tester for RJ11,RJ45 and BNC Cables, with Remote Unit & PoE Finder

Practical cable tester for telephone and network lines. The device tests all wire pairs and detects faults such as open, short-circuited, crossed or twisted wire pairs as well as split pair faults within seconds. With the associated remote unit, a cable or line can also be tested after installation. The operation is simple, the clear display is via LEDs. A battery is not included. The PoE testing unit shows if PoE voltage is present and if so, on which wire pairs (1-2/3-6 or 4-5/7-8). Plus PoE display.

For quick testing of network and telephone cables, with PoE-Finder

Suitable for RJ45-, RJ11- and BNC- cable

Master and remote unit with LED display

Tests continuity, assignment, ground and short

Also checks already installed cables with the remote unit

Identifies the existence and type of PoE (Midspan or Endspan)

9 V battery required (not included!)

Technical Features

Test the corect pin configuration of 1 0Base-T, 10Base-2 Etheret cable, RJ45/RJ11 modular cables, 258A, TIA 568A/568B and TokenRing Cable etc

PoE test supports lEEE802.3af and lEEE802.3at

Easy to read cable status and verify cable continuity, open short and miswireWith remote kit, it can remotely test cable far away either on wall plate or patch paneTest the grounding

With auto or manual scan

Operates with 9 Volt block battery

General product data:

Weight: 0.255 kg

Height: 4.5 cm

Width: 12 cm

Length: 19 cm

Package Contents

1 x Master box

1 x Remote unit

1 x PoE Tester

2 x BNC adaptor cables

1 x BNC male to male adaptor

3 x RJ45 to RJ11 adaptors

1 x Network Cable

1 x User manual